Nema 17 Stepper Motor Bipolar 59Ncm (84oz.in) 2A 42x48mm 4 Wires with 1m Cable and Connector

  • SKU: 17HS19-2004S1
  • Stock Status: In Stock
  • $ 9.15


This model is updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). The nema 17 stepper motor cable length is 1 meter, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector. It's good choice for 3D printers, CNC or robotics applications.

Full Shaft D-Cut Type: 17HT19S4200C2

Nema 17 Stepper Motor Electrical Specification

  • Manufacturer Part Number: 17HS19-2004S1
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 degree
  • Holding Torque: 59 Ncm(84oz.in)
  • Rated Current/Phase: 2.0 A
  • Coil Voltage: 2.8 V
  • Phase Resistance: 1.4 Ohms
  • Phase Inductance: 3.0 mH ± 20%(1KHz)

Nema 17 Stepper Motor Physical Specification

  • Frame Size: 42 x 42 mm
  • Body Length: 48 mm
  • Shaft Diameter: 5 mm
  • Shaft Length: 24 mm
  • Shaft D-cut Length: 15 mm
  • Number of Leads: 4
  • Lead Length: 1000 mm
  • Weight: 400 g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue


Resources

Electrical Specification
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 58
Holding Torque(oz.in) 84
Phase Resistance(Ohms) 3.0
Phase Inductance(mH) 1.4
Rated Current(A) 2
Step Angle(deg) 1.8
Physical Specification
Body Length(mm) 48
Frame Size(mm) 42 x 42
Single Shaft/Dual Shaft Single Shaft
Shaft Type(D-cut or O) D-cut
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 4
Lead Length(mm) 1000
Weight(g) 400

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on ..

$ 22.15

Full D cut Shaft Nema 17 Stepper Motor Bipolar 59Ncm (84oz.in) 2A 42x42x48mm 4 Wires with 1m Cable and Connector

Full D cut Shaft Nema 17 Stepper Motor Bipolar 59Ncm (84oz.in) 2A 42x42x48mm 4 Wires with 1m Cable and Connector

This model is updated version nema 17 stepper motor with holding torque of 59Ncm with a full d-cut s..

$ 9.49

150W 24V 6.5A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

150W 24V 6.5A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

The professional 150W 24V 6.5A switching power supply can be widely used in industrial automation an..

$ 12.21

Tags: nema, bipolar, 59ncm, (84oz.in), 42x48mm, wires, cable, connector, stepper, motor, arduino kit