Digital Stepper Drive 1.0-3.2A 10-30VDC for Nema 17, 23 Stepper Motor

  • SKU: DM332T
  • Stock Status: In Stock
  • $ 18.67


  • 5 or more $ 18.30
  • 10 or more $ 17.93
  • 50 or more $ 17.52

The digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(Nema 17 and Nema 23 size) smoothly with less heat and noise. It works with 10-30VDC voltage and can provide max 3.2A peak current. You can set the DIP switches to get the current and microsteps you need.

Key Features:

  • Manufacturer Part Number: DM332T
  • Manufacturer: Leadshine
  • Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
  • Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors
  • Step & direction (PUL/DIR) control
  • Multi-Stepping for smooth motor movement
  • Optically isolated inputs
  • Input voltage 10-30VDC
  • 8 selectable micro-step resolutions of 400-12800 via DIP switches
  • 8 selectable output current settings of 1 – 3.2A via DIP switches
  • Soft-start with no “jump” when powered on
  • Pulse input frequency up to 60 KHz
  • Automatic idle-current reduction
  • Protections for over-voltage and over-current

Electrical Specifications:

  • Output Peak Current: 1~3.2A (2.3 RMS)
  • Input Voltage: +10~30VDC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~60kHz
  • Isolation Resistance: 100MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 65℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 50℃ MAX
  • Vibration: 10-50Hz / 0.15mm
  • Storage Temperature: -20℃ - 65℃
  • Dimensions(L x W x H mm): 86 x 55 x 20
  • Weight: Approx. 90g (3.5oz)
  • Resources

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Nema 17 Bipolar 0.9deg 11Ncm (15.6oz.in) 1.2A 3.6V 42x42x21mm 4 Wires

Nema 17 Bipolar 0.9deg 11Ncm (15.6oz.in) 1.2A 3.6V 42x42x21mm 4 Wires

This model is a bipolar Nema 17 stepper motor with step angle 0.9 deg and size 42x42x21mm. The rated..

$ 10.22

Nema 17 stepper motor Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Cable & Connector

Nema 17 stepper motor Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Cable & Connector

This model is a bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. The rated ..

$ 8.09

Nema 17  stepper motor Unipolar 1.8deg 26Ncm (36.8oz.in) 1.2A 4V 42x42x39mm 6 Wires

Nema 17 stepper motor Unipolar 1.8deg 26Ncm (36.8oz.in) 1.2A 4V 42x42x39mm 6 Wires

This model is a nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. The rated current ..

$ 8.09

Nema 23 Bipolar 1.8deg 0.6Nm (85oz.in) 1.4A 4.1V 57x57x44mm 8 Wires

Nema 23 Bipolar 1.8deg 0.6Nm (85oz.in) 1.4A 4.1V 57x57x44mm 8 Wires

This model is a Nema 23 stepper motor with step angle 1.8deg and size 57x57x44mm. It has 8 wires, wh..

$ 12.44

Nema 23 Bipolar 1.8deg 1.16Nm (164.3oz.in) 1.5A 5.4V 57x57x56mm 4 Wires

Nema 23 Bipolar 1.8deg 1.16Nm (164.3oz.in) 1.5A 5.4V 57x57x56mm 4 Wires

This model is a bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. The rated ..

$ 13.85

Nema 23 Bipolar 1.8deg 2.4Nm (340oz.in) 1.8A 4.95V 57x57x104mm 4 Wires

Nema 23 Bipolar 1.8deg 2.4Nm (340oz.in) 1.8A 4.95V 57x57x104mm 4 Wires

This model is a bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x104mm. The rated..

$ 24.55

Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 1A 8.6V 57x57x76mm 6 Wires

Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 1A 8.6V 57x57x76mm 6 Wires

This model is an unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. The rate..

$ 18.78

High Precision Gearbox Nema 17 Stepper Motor L=39mm Gear Ratio 3:1 Planetary

High Precision Gearbox Nema 17 Stepper Motor L=39mm Gear Ratio 3:1 Planetary

The Nema 17 gearbox stepper motor has a body length of 39 mm, a rated current of 1.68A, an..

$ 40.25

High Precision Gearbox Nema 17 Stepper Motor Gear Ratio 5:1 Planetary L=39mm 1.68A

High Precision Gearbox Nema 17 Stepper Motor Gear Ratio 5:1 Planetary L=39mm 1.68A

The Nema 17 gearbox stepper motor has a body length of 39 mm, a rated current of 1.68A, an..

$ 40.25

High Precision Gearbox Nema 17 Stepper Motor L=39mm Gear Ratio 10:1 Planetary

High Precision Gearbox Nema 17 Stepper Motor L=39mm Gear Ratio 10:1 Planetary

The Nema 17 gearbox stepper motor has a body length of 39 mm, a rated current of 1.68A, an..

$ 40.25

Nema 17 Stepper Motor L=39mm 0.4A Gear Ratio 20:1 High Precision Planetary Gearbox

Nema 17 Stepper Motor L=39mm 0.4A Gear Ratio 20:1 High Precision Planetary Gearbox

The Nema 17 gearbox stepper motor has a body length of 39 mm, a rated current of 0.40A, an..

$ 49.37

Nema 6 Bipolar 1.8deg 0.58Ncm (0.82oz.in) 0.3A 14x14x30mm 4 Wires

Nema 6 Bipolar 1.8deg 0.58Ncm (0.82oz.in) 0.3A 14x14x30mm 4 Wires

This bipolar Nema 6 stepper motor with step angle 1.8deg and size 14x14x30mm. It has 4 wires, each p..

$ 43.32

Digital Stepper Driver 0.3-2.2A 10-30VDC for Nema 8, 11, 14, 16, 17 Stepper Motor

Digital Stepper Driver 0.3-2.2A 10-30VDC for Nema 8, 11, 14, 16, 17 Stepper Motor

The digital stepper drive implemented with advanced stepper control technology. It is easy to use an..

$ 17.43

Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor

Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor

The DM556T is a digital stepper driver with simple design and easy setup. By implementing advanced s..

$ 25.80

350W 36V 9.7A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

350W 36V 9.7A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

The professional 350W 9.8A switching CNC 36V power supply can be widely used in industrial automatio..

$ 21.37

Tags: digital, stepper, drive, 1.0-3.2a, 10-30vdc, for, nema, 17, , motor, driver controller diy