Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

  • Brand: Leadshine
  • SKU: DM542T
  • Stock Status: In Stock

  • $ 22.15


0 reviews / Write a review

The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM542T can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM542T an ideal choice for high requirement applications.

Key Features:

  • Manufacturer Part Number: DM542T
  • Manufacturer: Leadshine
  • Input voltage 20-50VDC
  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
  • 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
  • Soft-start with no “jump” when powered on
  • 8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
  • Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors, works well as nema 17 driver, nema 23 driver
  • Support PUL/DIR mode
  • Over-voltage and over-current protections

Electrical Specifications:

  • Output Peak Current: 1.0~4.2A (3.0 RMS)
  • Input Voltage: +20~50VDC (Typical 36VDC)
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~200kHz
  • Pulse Width: 2.5μS
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ － 65℃
  • Humidity: 40%RH－90%RH
  • Operating Temperature: -10℃ － 45℃
  • Vibration: 10-55Hz / 0.15mm
  • Storage Temperature: -20℃ － 65℃
  • Dimensions(L x W x H mm): 118 x 75.5 x 25.5
  • Weight: Approx. 210g (7.4oz)

    • Resources

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Nema 17 Bipolar 0.9deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x42x48mm 4 Wires

Nema 17 Bipolar 0.9deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x42x48mm 4 Wires

This model is a bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. The rated ..

$ 12.28

Dual Shaft Nema 17 Bipolar 59Ncm (83.78oz.in) 2A 42x42x48mm 4 Wires

Dual Shaft Nema 17 Bipolar 59Ncm (83.78oz.in) 2A 42x42x48mm 4 Wires

This model is a bipolar dual shaft Nema 17 stepper motor, it with step angle 1.8deg and si..

$ 9.49

Nema 17 Stepper Motor Bipolar 0.9deg 46Ncm (65.1oz.in) 2A 2.9V 42x42x48mm 4 Wires

Nema 17 Stepper Motor Bipolar 0.9deg 46Ncm (65.1oz.in) 2A 2.9V 42x42x48mm 4 Wires

This model is a bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. The rated ..

$ 12.28

Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 1.68A 2.8V 42x42x39mm 4 Wires

Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 1.68A 2.8V 42x42x39mm 4 Wires

This model is a bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. The r..

$ 8.09

Nema 17 Bipolar 1.8deg 65Ncm (92oz.in) 2.1A 3.36V 42x42x60mm 4 Wires

Nema 17 Bipolar 1.8deg 65Ncm (92oz.in) 2.1A 3.36V 42x42x60mm 4 Wires

This model is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and siz..

$ 11.65

Nema 17 Bipolar 45Ncm (64oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector

Nema 17 Bipolar 45Ncm (64oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector

This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40..

$ 8.41

Nema 17 Stepper Motor Bipolar 59Ncm (84oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector

Nema 17 Stepper Motor Bipolar 59Ncm (84oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector

This model is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). The&..

$ 9.15

Nema 17 Stepper Motor Unipolar 1.8deg 65Ncm (92oz.in) 1.2A 7.2V 42x42x60mm 6 Wires

Nema 17 Stepper Motor Unipolar 1.8deg 65Ncm (92oz.in) 1.2A 7.2V 42x42x60mm 6 Wires

This model is an unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. The rate..

$ 11.65

Dual Shaft Nema 23 Bipolar 1.8deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires

Dual Shaft Nema 23 Bipolar 1.8deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires

This model is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. ..

$ 13.85

Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires

Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires

This model is a bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. The rated ..

$ 12.27

Dual Shaft Nema 23 Unipolar/Bipolar 1.8deg 2.5Nm (354oz.in) 2.1A 57x57x114mm 8 Wires

Dual Shaft Nema 23 Unipolar/Bipolar 1.8deg 2.5Nm (354oz.in) 2.1A 57x57x114mm 8 Wires

This nema 23 stepper motor with step angle 1.8deg and size 57x57x114mm. It has 8 wires, which have t..

$ 26.34

Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4 Wires

Dual Shaft Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 57x57x76mm 4 Wires

This model is a dual shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. ..

$ 19.77

Dual Shaft Nema 23 Unipolar/Bipolar 1.8deg 1.26Nm (178.4oz.in) 3A 57x57x56mm 8 Wires

Dual Shaft Nema 23 Unipolar/Bipolar 1.8deg 1.26Nm (178.4oz.in) 3A 57x57x56mm 8 Wires

This Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 8 wires, which have th..

$ 13.85

Dual Shaft Nema 23 Unipolar/Bipolar 1.8deg 2.83Nm (400oz.in) 2.8A 57x84mm 8 Wires

Dual Shaft Nema 23 Unipolar/Bipolar 1.8deg 2.83Nm (400oz.in) 2.8A 57x84mm 8 Wires

This nema 23 stepper motor with step angle 1.8deg and size 57x57x84mm. It has 8 wires, which have th..

$ 20.38

Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires

Dual Shaft Nema 23 Unipolar 1.8deg 1.35Nm (191.2oz.in) 3A 3V 57x76mm 6 Wires

This motor is an unipolar nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. The rate..

$ 19.77

Nema 23 Bipolar 0.9deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires

Nema 23 Bipolar 0.9deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires

This model is a bipolar Nema 23 stepper motor with step angle 0.9deg and size 57x57x56mm. The rated ..

$ 15.36

Nema 23 Bipolar 1.8deg 0.9 Nm (127.5oz.in) 2A 57x57x52mm 4 Wires

Nema 23 Bipolar 1.8deg 0.9 Nm (127.5oz.in) 2A 57x57x52mm 4 Wires

This model is a bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x52mm. The rated ..

$ 13.22

Nema 23 Bipolar 1.8deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires

Nema 23 Bipolar 1.8deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires

This model is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x5..

$ 13.85

Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires

Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 2.8A 3.2V 57x57x76mm 4 Wires

This model is one of the most popular Nema 23 stepper motor, with step angle 1.8deg and size 57x57x7..

$ 17.92

Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires

Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3A 3.36V 57x57x76mm 4 Wires

This model is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x5..

$ 18.78

Round Nema 23 Bipolar 1.8deg 70Ncm (99.13oz.in) 2.8A 1.8V 57x52mm 4 Wires

Round Nema 23 Bipolar 1.8deg 70Ncm (99.13oz.in) 2.8A 1.8V 57x52mm 4 Wires

This moel is an round bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x52mm. The rat..

$ 17.75

Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC

Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC

This model is the strongest Nema 23 stepper cnc motors, with step angle 1.8deg and size 57x57x113mm...

$ 26.34

Nema 23 Unipolar 1.8deg 0.9Nm (127.5oz.in) 1A 7.4V 57x57x56mm 6 Wires

Nema 23 Unipolar 1.8deg 0.9Nm (127.5oz.in) 1A 7.4V 57x57x56mm 6 Wires

This model is an unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. The rate..

$ 13.85

High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 5:1 Planetary 2.8A

High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 5:1 Planetary 2.8A

Electrical SpecificationManufacturer Part Number: 23HT22S4280-AG5Motor Type: Bipolar StepperStep Ang..

$ 64.33

High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 10:1 Planetary 2.8A

High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 10:1 Planetary 2.8A

The Nema 23 stepper motor has 56mm body length and rated current of 2.8A, and integrates 54mm planet..

$ 64.33

High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 15:1 Planetary 2.8A

High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 15:1 Planetary 2.8A

The Nema 23 stepper motor has 56mm body length and rated current of 2.8A, and integrates 61.65mm pla..

$ 77.43

Dual Shaft High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 50:1 Planetary 2.8A

Dual Shaft High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 50:1 Planetary 2.8A

Electrical SpecificationManufacturer Part Number: 23HT22D4280-AG50Motor Type: Bipolar StepperStep An..

$ 81.35

Nema 23 Stepper Motor L=56mm Gear Ratio 20:1 High Precision Planetary Gearbox

Nema 23 Stepper Motor L=56mm Gear Ratio 20:1 High Precision Planetary Gearbox

The Nema 23 stepper motor has 56mm body length and rated current of 2.8A, and integrates 61.65mm pla..

$ 77.43

Nema 23 Stepper Motor L=56mm Gear Ratio 50:1 High Precision Planetary Gearbox

Nema 23 Stepper Motor L=56mm Gear Ratio 50:1 High Precision Planetary Gearbox

The Nema 23 stepper motor has 56mm body length and rated current of 2.8A, and integrates 61.65mm pla..

$ 77.43

High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 100:1 Planetary 2.8A

High Precision Gearbox Nema 23 Stepper Motor L=56mm Gear Ratio 100:1 Planetary 2.8A

Electrical SpecificationManufacturer Part Number: 23HT22S4280-AG100Motor Type: Bipolar StepperStep A..

$ 79.04

Nema 23 Stepper Motor L=76mm Gear Ratio 10:1 High Precision Planetary Gearbox

Nema 23 Stepper Motor L=76mm Gear Ratio 10:1 High Precision Planetary Gearbox

Electrical SpecificationManufacturer Part Number: 23HT30S4280-AG10Motor Type: Bipolar StepperStep An..

$ 82.36

Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor

Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor

The DM556T is a digital stepper driver with simple design and easy setup. By implementing advanced s..

$ 25.80

Digital Stepper Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 42 Motor

Digital Stepper Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 42 Motor

The DM860T is a fully digital stepper driver developed with advanced DSP control algorithm based on ..

$ 43.16

1 Axis Stepper CNC Kit 1.9Nm(269oz.in) Nema 23 Stepper Motor & Driver

1 Axis Stepper CNC Kit 1.9Nm(269oz.in) Nema 23 Stepper Motor & Driver

The CNC kit included:1x Digital Stepper Driver: DM542T1x Nema 23 Bipolar Stepper MotorMotor Specific..

$ 39.22

Nema 23 Gearbox Stepper Motor Bipolar L=56mm 2.8A Gear Ratio 47:1 Planetary

Nema 23 Gearbox Stepper Motor Bipolar L=56mm 2.8A Gear Ratio 47:1 Planetary

This Nema 23 stepper motor with 56mm body and 2.8A rated current, integrated a planetary gearbox of ..

$ 47.33

1 Axis Stepper CNC Kit 3.0Nm(425oz.in) Nema 23 Stepper Motor & Driver

1 Axis Stepper CNC Kit 3.0Nm(425oz.in) Nema 23 Stepper Motor & Driver

This CNC kit included:1x Digital Stepper Driver: DM542T1x Nema 23 Bipolar Stepper MotorMotor Specifi..

$ 46.33

Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2v 57x57x76mm 4Wires Φ6mm Shaft

Nema 23 Bipolar 1.9Nm (269oz.in) 2.8A 3.2v 57x57x76mm 4Wires Φ6mm Shaft

This model is one of the most popular Nema 23 stepper motor, with step angle 1.8deg and size 57x57x7..

$ 17.92

Digital Stepper Driver 0.5-8.2A 180-240VAC for Nema 34,42 Stepper Motor

Digital Stepper Driver 0.5-8.2A 180-240VAC for Nema 34,42 Stepper Motor

The DM2282T is a fully digital stepper drive developed with advanced DSP control algorithm based on ..

$ 125.63

Full D-cut Shaft Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector

Full D-cut Shaft Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector

This model is an updated version nema 17 stepper motor with holding torque of 59Ncm and a full d-cut..

$ 9.49

Nema 17 Stepper Motor Bipolar L=60mm w/ Gear Ratio 51:1 Planetary Gearbox

Nema 17 Stepper Motor Bipolar L=60mm w/ Gear Ratio 51:1 Planetary Gearbox

This Nema 17 stepper motor with 60mm body and 2.1A rated current, integrated a planetary gearbox of ..

$ 27.51

Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 2.1A 60x60x88mm 8 Wires

Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 2.1A 60x60x88mm 8 Wires

This model of nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. It has 8 wires, whic..

$ 22.61

Dual Shaft Nema 24 Bipolar 3.1Nm (439 oz.in) 3.5A 60x60x88mm 4 Wires

Dual Shaft Nema 24 Bipolar 3.1Nm (439 oz.in) 3.5A 60x60x88mm 4 Wires

This bipolar Nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. The rated current is ..

$ 22.61

Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires

Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm (566 oz.in) 60x60x100mm 4 Wires

The motor is a dual-shaft motor with 13.5mm long rear shaft, and the shaft diameter is 8mm. The rear..

$ 27.43

Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 2.1A 60x60x88mm 4 Wires

Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 2.1A 60x60x88mm 4 Wires

This nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. The rated current is 2.1A. Th..

$ 22.61

Nema 17 Bipolar 1.8deg 45Ncm (64oz.in) 1.68A 2.8V 42x42x48mm 4 Wires

Nema 17 Bipolar 1.8deg 45Ncm (64oz.in) 1.68A 2.8V 42x42x48mm 4 Wires

This model is a bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 w..

$ 12.28

Nema 17 17HS19-2004S1 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4 Wires w/ 1m Cable & Connector

Nema 17 17HS19-2004S1 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4 Wires w/ 1m Cable & Connector

This model is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). The ..

$ 9.15

350W 36V 9.7A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

350W 36V 9.7A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

The professional 350W 9.8A switching CNC 36V power supply can be widely used in industrial automatio..

$ 21.37

1 Axis Stepper CNC Kit 1.9Nm(269oz.in) Nema 23 Stepper Motor & Driver

1 Axis Stepper CNC Kit 1.9Nm(269oz.in) Nema 23 Stepper Motor & Driver

The CNC kit included:1x Digital Stepper Driver: DM542T1x Nema 23 Bipolar Stepper MotorMotor Specific..

$ 39.22

1 Axis Stepper Kit 4.0Nm(566oz.in) Nema 24 Stepper Motor & Driver

1 Axis Stepper Kit 4.0Nm(566oz.in) Nema 24 Stepper Motor & Driver

CNC kit included:1x Digital Stepper Driver: DM542T1x Dual Shaft Nema 24 Stepper MotorMotor Specifica..

$ 44.71

1 Axis Stepper CNC Kit 3.1Nm(439oz.in) Nema 24 Stepper Motor & Driver

1 Axis Stepper CNC Kit 3.1Nm(439oz.in) Nema 24 Stepper Motor & Driver

This CNC kit included:1x Digital Stepper Driver: DM542T1x Dual Shaft Nema 24 Stepper MotorMotor Spec..

$ 42.05

CNC Router Kit 3 Axis 3.0Nm (425oz.in) Nema 23 Stepper Motor w/ Driver

CNC Router Kit 3 Axis 3.0Nm (425oz.in) Nema 23 Stepper Motor w/ Driver

The CNC kit included:3x Digital Stepper Drive DM542T3x 3Nm Nema 23 Stepper Motor1x 400W 36V Switchin..

$ 158.32

Leadshine M542C Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

Leadshine M542C Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

The M542C is a fully digital stepper driver developed with advanced DSP control algorithm based on t..

$ 32.25

Tags: digital, stepper, driver, 1.0-4.2a, 20-50vdc, nema, 17, 23, 24, motor bipolar phase