Digital Stepper Driver 2.1-11.7A 176-253VAC 3-Phase Nema 34, 42, 52 Stepper Motor

  • SKU: 3DM2283T
  • Stock Status: In Stock
  • $ 112.58


The digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, 3DM2283T can drive a stepper motor at much lower noise, lower heating, and smoother movement.

Key Features:

  • Manufacturer Part Number: 3DM2283T
  • Manufacturer: Leadshine
  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
  • Supply voltage up to 240 VAC
  • Output current programmable, from 2.1A to 11.7A. It can also be set via DIP switches
  • Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 3-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Over-voltage, Under-voltage, over-current, phase-error protections

Electrical Specifications:

  • Output Peak Current: 2.1 - 11.7 A
  • Input Voltage: 176 - 253 VAC
  • Logic Signal Current: 7 - 16 mA (Typical 10 mA)
  • Pulse Input Frequency: 0 - 200 kHz
  • Isolation Resistance: 500 MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0 - 50 ℃
  • Humidity: 40% - 90% RH
  • Operating Temperature: 70 ℃ MAX
  • Vibration: 10-55Hz/0.15mm
  • Storage Temperature: -20 - 65 ℃
  • Dimensions (L x W x H mm): 200 x 145 x 83
  • Weight: Approx. 1300 g (45.86 oz)

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Digital Stepper Driver 0.5-8.2A 180-240VAC for Nema 34,42 Stepper Motor

Digital Stepper Driver 0.5-8.2A 180-240VAC for Nema 34,42 Stepper Motor

The DM2282T is a fully digital stepper drive developed with advanced DSP control algorithm based on ..

$ 125.63

Tags: digital, stepper, driver, 3dm2283t, 2.1-11.7a, 176-253vac, 3-phase, nema, 34, 42, 52, motor