Dual Shaft Nema 17 Bipolar 59Ncm (83.78oz.in) 2A 42x42x48mm 4 Wires

  • SKU: 17HT19D4200
  • Stock Status: In Stock
  • $ 9.49


This model is a bipolar dual shaft Nema 17 stepper motor, it with step angle 1.8deg and size 42x42x48mm. The rated current is 2A, with holding torque 59Ncm (83.78oz.in).

Electrical Specification

  • Manufacturer Part Number: 17HT19D4200
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 59Ncm(83.78oz.in)
  • Rated Current/Phase: 2.00A
  • Coil Voltage: 2.80V
  • Phase Resistance: 1.40ohms
  • Phase Inductance: 3.00mH ± 20%(1KHz)

Physical Specification

  • Frame Size:42x42mm
  • Body Length: 48mm
  • Shaft Diameter: Φ5mm
  • Front Shaft Length: 25mm
  • Rear Shaft Length: 13mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 400g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue


Resources

Electrical Specification
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 59
Holding Torque(oz.in) 84
Phase Resistance(Ohms) 1.4
Phase Inductance(mH) 3
Rated Current(A) 2
Step Angle(deg) 1.8
Physical Specification
Body Length(mm) 48
Frame Size(mm) 42 x 42
Single Shaft/Dual Shaft Dual Shaft
Shaft Type(D-cut or O) O
Shaft Diameter(mm) 5
Shaft Length(mm) 25
No. of Lead 4
Lead Length(mm) 500
Weight(g) 400

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on ..

$ 22.15

150W 24V 6.5A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

150W 24V 6.5A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

The professional 150W 24V 6.5A switching power supply can be widely used in industrial automation an..

$ 12.21

Tags: dual, shaft, nema, bipolar, 59ncm, (83.78oz.in), 2.8v, 42x42x48mm, wires, 42mm, stepper, motor holding, torque ip65