Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 5V 86x86x150mm 4 Wires

  • SKU: 34HT59D4500
  • Stock Status: In Stock
  • $ 82.31


This stepper motor is a dual-shaft nema 34 stepper motor with 15mm length rear shaft, and the shaft diameter is 12mm. The rear shaft can be equipped with encoder, handwheel or equivalent.

Nema 34 Stepper Motor Electrical Specification

  • Manufacturer Part Number: 34HT59D4500
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 13 Nm(1841oz.in)
  • Rated Current/Phase: 5 A
  • Coil Voltage: 5 V
  • Phase Resistance: 1 Ohms
  • Phase Inductance: 11 mH ± 20%(1KHz)

Nema 34 Stepper Motor Physical Specification

  • Frame Size: 86 x 86 mm
  • Body Length: 151.5 mm
  • Front Shaft:
  • Front Shaft Diameter: Φ14 mm
  • Front Shaft Length: 37 mm
  • Front Shaft Key-Way Length: 25 mm
  • Front Shaft Key-Way Width: 5 mm
  • Rear Shaft:
  • Rear Shaft Diameter: Φ12 mm
  • Rear Shaft Length: 15 mm
  • Rear Shaft Key-Way Length: 14 mm
  • Rear Shaft Key-Way Width: 4 mm
  • Number of Leads: 4
  • Lead Length: 500 mm
  • Weight: 5.3 kg

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 1300
Holding Torque(oz.in) 1841
Phase Resistance(Ohms) 1
Phase Inductance(mH) 11
Rated Current(A) 5
Step Angle(deg) 1.8
Physical Specification
Body Length(mm) 150
Frame Size(mm) 86 x 86
Single Shaft/Dual Shaft Dual Shaft
Shaft Type(D-cut or O) Key Way
Shaft Diameter(mm) 14
Shaft Length(mm) 37
No. of Lead 4
Lead Length(mm) 500
Weight(g) 5300

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

350W 48V 7.3A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

350W 48V 7.3A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

The professional switching power supply 48V 350W 7.3A can be widely used in industrial automation an..

$ 21.37

Digital Stepper Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 42 Motor

Digital Stepper Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 42 Motor

The DM860T is a fully digital stepper driver developed with advanced DSP control algorithm based on ..

$ 43.16

Tags: keyway, dual shaft, nema 34 stepper motro, nema 34, 13nm, 86mm sizes speed