Leadshine M542C Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

  • Brand: Leadshine
  • SKU: M542C
  • Stock Status: In Stock
  • $ 32.25


The M542C is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, M542C can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make M542C an ideal choice for high requirement applications.

Key Features:

  • Manufacturer Part Number: M542C
  • Manufacturer: Leadshine
  • Input voltage 20-50VDC
  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
  • 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
  • Soft-start with no “jump” when powered on
  • 8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
  • Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors, works well as nema 17 driver, nema 23 driver
  • Support PUL/DIR mode
  • Over-voltage and over-current protections

Electrical Specifications:

  • Output Peak Current: 1.0~4.2A (3.0 RMS)
  • Input Voltage: +20~50VDC (Typical 36VDC)
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~200kHz
  • Pulse Width: 2.5μS
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 65℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: -10℃ - 45℃
  • Vibration: 10-55Hz / 0.15mm
  • Storage Temperature: -20℃ - 65℃
  • Dimensions(L x W x H mm): 118 x 75.5 x 25.5
  • Weight: Approx. 210g (7.4oz)

  • Resources

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor

The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on ..

$ 22.15

Tags: digital, stepper, driver, 1.0-4.2a, 20-50vdc, nema, 17, 23, 24, motor bipolar phase