Nema 17 Bipolar 45Ncm (64oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
- SKU: 17HT16S4200C1
- Stock Status: In Stock
-
$ 8.41
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, rated current 2.0A, with holding torque 45Ncm (64oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications.
This is the updated version with a pluggable lead wire and smaller body. It's more suitable for your 3D printers: 17HT15S4150C1
Electrical Specification
- Manufacturer Part Number: 17HT16S4200C1
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 45 Ncm(64oz.in)
- Rated Current/Phase: 2 A
- Coil Voltage: 2.2 V
- Phase Resistance: 1.1 Ohms
- Phase Inductance: 2.6 mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42 mm
- Body Length: 40 mm
- Shaft Diameter: 5 mm
- Shaft Length: 23 mm
- D-cut Length: 21 mm
- Number of Leads: 4
- Lead Length: 1000 mm
- Weight: 310 g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 17HT16S4200C1.pdf
- Torque Curve: 17HT16S4200C1 Torque Curve.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 45 |
| Holding Torque(oz.in) | 64 |
| Phase Resistance(Ohms) | 1.1 |
| Phase Inductance(mH) | 2.6 |
| Rated Current(A) | 2 |
| Step Angle(deg) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 40 |
| Frame Size(mm) | 42 x 42 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type(D-cut or O) | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 23 |
| No. of Lead | 4 |
| Lead Length(mm) | 1000 |
| Weight(g) | 310 |
Related Products
Nema 17 stepper motor Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Cable & Connector
This model is a bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. The rated ..
$ 8.09
Digital Stepper Driver 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on ..
$ 22.15
150W 24V 6.5A 115/230V Switching Power Supply Stepper Motor CNC Router Kits
The professional 150W 24V 6.5A switching power supply can be widely used in industrial automation an..
$ 12.21
Tags: nema, bipolar, 45ncm, (64oz.in), 42x42x40mm, wires, cable, connector, stepper, motor 42mm, arduino